MOC-47988 Santa Fe EMD E8 Locomotive (3)
MOC-47988 Santa Fe EMD E8 Locomotive
USD$79.99 Add to cart

MOC-47988 Santa Fe EMD E8 Locomotive

USD$79.99

Earn 80 points upon purchasing this product.

Use up to 7999 points to purchase this product!
MOC-47988 Santa Fe EMD E8 Locomotive (3)
This item: MOC-47988 Santa Fe EMD E8 Locomotive
USD$71.99
USD$79.99
USD$60.29
USD$68.39
USD$59.39
  • FREE worldwide shipping
  • SECURE payment platfrom
  • FREE replacement of any missing or damaged parts
Guaranteed Safe Checkout

pay-800x80+1

MOC-47988 Santa Fe EMD E8 Locomotive

History:  Cite the following URLhttps://en.wikipedia.org/wiki/EMD_E8

The E8 was a 2,250-horsepower (1,678 kW), A1A-A1A passenger-train locomotive built by General Motors‘ Electro-Motive Division (EMD) of La Grange, Illinois. A total of 450 cab versions, or E8As, were built from August 1949 to January 1954, 447 for the U.S. and 3 for Canada. 46 E8Bs were built from December 1949 to January 1954, all for the U.S. The 2,250 hp came from two 12 cylinder model 567B engines, each driving a generator to power the two traction motors on one truck. The E8 was the ninth model in the line of passenger diesels of similar design known as EMD E-units. Starting in September 1953, a total of 21 E8As were built which used either the 567BC or 567C engines.[1]

In profile the front of the nose of E7, E8, and E9 units is less slanted than earlier EMD units, and E7/8/9s (and their four axle cousins, the F-unit series) have been nicknamed “bulldog nose” units. Earlier E-unit locomotives were nicknamed “slant nose” units. After passenger trains were canceled on the Erie Lackawanna in 1970 (excluding their commuter service, which the Metropolitan Transportation Authority subsidized in 1973), the E8s were re-geared for freight and were very reliable for the EL. These units were on freight trains until the early years of Consolidated Railroad Corporation (“Conrail“). Amtrak used E8s until the late 70s.[2][3]

Locomotive, Diesel, EMD E8 - Santa Fe

From count_of_brick

” i´m from Germany. I Love the American Cargo and Passenger Trains, so i made some MOCs for them.

This is my Variation of the Santa Fe EMD E8 Locomotive from the 1940s to 1950s.

The Model contains 672 Parts, is 6 Studs Wide and (without Magnets) 42 Studs long. The Locomotive is equipped with a Hub Dummy for Powered Up.

The Yellow sideline was not that easy to accomplish, but i think i did a decent Job. You are welcome to contact me about any questions, suggestions or requests. “

Features:

  • Made of high quality, eco-friendly ABS plastic which is odorless and has no rough edges.
  • 672+ parts . The parts are compatible with other building block brands, being neither too tight nor too loose.
  • Detailed PDF manual on USB drive.
  • The parts in this MOC set are sorted manually and all care is taken.
  • If there are any missing or damaged parts, please contact us for FREE replacement.

 

Additional information

Weight0.85 kg
Dimensions37 × 27 × 7 cm

General Policy:

These are Letbricks.com’s Standard Return Policies applicable only to products purchased by you directly from the Letbricks.com website, We will be responsible for returned shipping fee and customs.

1) All products can be requested for Return Merchandise Authorization within warranty of return(30 Days).

2)All returns effected after getting Return Merchandise Authorization.

If a product is defective before you start using it or is not working, you can return it to us within the validity warranty period (30 Days).

Note: Letbricks was incorporated by Chuang Teng Trading Co., Ltd. But the package is usually required to be returned to our China warehouse (Please see below). Please return the package with the permission of Letbricks, otherwise letbricks reserves the right not to accept the package.

Return Address :
Office, 3rd Floor, Building B, Jinxiang Industrial Park, Hexi New Village, Hexi New Village, Guanlan, Longhua District, Shenzhen, Guangdong, China

If the package is damaged, deformed or otherwise damaged due to personal reasons, or if you want to return the package after receiving the goods, the buyer needs to bear the freight and taxes.

Warning: Products that are not eligible for return and will be sent back to you at your cost and expense if received by us:

1)Any itemsnot purchased from Letbricks.com

2)Any itemswithout a valid, readable serial number, including but not limited to products with missing, damaged, altered, or otherwise unreadable serial number.

3)Any items that exhibits physical damage, or damage caused by accidental breakage, misuse, or general wear and tear.
If items are lost while being returned, we will not be able to assist you as we wish we could. We recommend that you select a tracked shipping method to return the defective products.

4)Items returned without all original packaging and accessories, including the retail box, manuals, cables, and all other items originally included with the item.

The RMA Process & Three Easy Steps:

1. Get RMA Authorization after you submit a RMA request by visiting Letbricks.com.
How to get RMA Authorization :
Please send a email of the RMA request to our Contact US page,we will response you within 1-2 business days.RMA request should include the following information: Order Number, SKU, the reason of sending back and post images, choose replacement or refund money and other your related concern.

2. Ship the return goods after you get the RMA authorization.
Once you ship return goods, please note the return item must be with original packing, accessories and shipping address from Letbricks.com customer service center together with RMA authorization.
Notes:
please offer tracking number for return shipment. Letbricks.com won’t take any responsibility for any missing return shipment.

3. Get the replacement or Refund.
Letbricks will arrange for resend or refund upon receiving your return package within 1-3 business days. The money will send back to you within 3-5 business days ,if you did’t receive money after 5 business days, please contact with us: service@letbricks.com.

We have put a lot of focus on making sure the items get delivered to our customers as quickly as possible.

Processing time and shipping time

The total time is the sum of the processing time and the shipping time.

Processing time = the time between when you place an order and when we ship it; Please refer to the image below.

processing-time

Note: Since all parts of our products are sorted manually, the processing time of the product is related to the number of parts. Please refer to the product details page for the specific processing time.

Shipping time = the time between when your order has been shipped and delivered to you;

shipping

NOTE:
Tax fee: No tax fee whole store
Business days: Monday~Friday ( excluded holidays and weekends ), (GMT-5)The Eastern Time Zone of USA.

Shipping from:

Office, 3rd Floor, Building B, Jinxiang Industrial Park, Hexi New Village, Hexi New Village, Guanlan, Longhua District, Shenzhen, Guangdong, China

Shipping area: the worldwide

Any other question, please contact us at letbricks@service.com.